Replies – Forums – Richarde007

Forum Replies Created

Richarde007
September 25, 2007 at 9:39 am in reply to: Audio balance

I just hooked the deck upto an external video and audio monitor through S-Video and stereo RCA’s and the the left-right balance seems fine.

Also when capturing through firwire i don’t have this problem….. i can’t seem to find any setting anywhere that will affect this problem.
Richarde007
September 25, 2007 at 9:20 am in reply to: Audio balance

Bob,

I’m using a breakout cable, so i can’t do that unfortunately. I contacted AJA and they sent me a new card but no difference…… i guess it could be the deck but it’s only 6 months old???

Would you recommend removing FCP completely and re-installing?
Richarde007
September 20, 2007 at 1:33 pm in reply to: Audio balance

I’ve just tried swapping the cables around it doesn’t follow it. I haven’t got another way of trying the breakout cable…. do you know which setting can be altered that will affect this in the J30 menu?
Richarde007
July 20, 2007 at 1:28 pm in reply to: Capturing out of sync

AJA support didn’t really suggest anything different to what everyone is saying here. Trash my preferences, reinstall etc. I spoke to Rudy and although he was very helpful couldn’r seem to work out the problem.

The synch seems to be consistently out most of the time but occasinally will slip in. This could be some of the old source material i’m dealing with though.

Yes, it’s out of sync on a pc and when compressed to MPEG2 and put in a DVD player.
Richarde007
July 20, 2007 at 9:13 am in reply to: Capturing out of sync

Lumiere,

I’m capturing through analogue. if i do just play the captured quicktime file the sync is still out which is what is puzzling me.

Would you recommend the AJA HD10AVA box then to embed the audio?
Richarde007
July 19, 2007 at 2:34 pm in reply to: Capturing out of sync

“So when you look at the waveforms in the timeline, you can clearly see that the audio is out of sync with the video? I’ve never seen this here with Kona captures and I do some work in PAL.”

Yep, that’s what i’m getting.
Richarde007
July 19, 2007 at 1:33 pm in reply to: Capturing out of sync

Sorry to labour the point but basically what you’re saying is that I am introducing the sync problems by not doing so. If i setup FCP so that everything is set to monitor through the AJA card it will then capture in sync and then i will be able to export in sync?
Richarde007
July 19, 2007 at 1:23 pm in reply to: Capturing out of sync

Ok, so what do i need to put on my shopping list ideally? External monitor and powered speakers that accept XLR connections?

It isn’t HD btw, it’s SD PAL
Richarde007
July 19, 2007 at 1:17 pm in reply to: Capturing out of sync

With a desktop monitor and headphones or lineout desktop speakers.

I realise this isn’t ideal but surely this shouldn’t affect the actual capture and export?
Richarde007
July 19, 2007 at 1:12 pm in reply to: Capturing out of sync

Walter,

Thanks for getting back to me so fast.

I forgot to mention that i’ve already done that after scouring the net for any leads and still no joy.

Any other ideas?