Replies – Forums – Reave

Forum Replies Created

Reave
January 26, 2011 at 7:02 pm in reply to: pasteing Filters

I understand, but can you walk me through the mechanics,say I CC a cam1 clip and want to copy ,paste theCC to all cam1 clips in timeline?
Thanks- this will save me A LOT of time -Reave
Reave
October 23, 2008 at 4:23 pm in reply to: Sound Proofing Control Room

I have sound foam inside the room and it works very well keeping reflections
down inside the room however the real problem is keeping sound from
penetrating the wall of the room to the outside. other than sealing cracks and such
is there any other solution to this problem? will acoustic Lead foil I hear about work?
-Reave
Reave
October 30, 2007 at 7:24 pm in reply to: Mic Hum

Hi Ty

As you suggested I opened the the mic up. Didn’t see any metal, then put it
Back together and the hum was almost gone! I have been trying to get AKG on
the line to send it. Must have been something rubbing in there you think?

Reave
Reave
July 21, 2007 at 4:27 pm in reply to: To Balance or not to Balance/ That is the Question

Thanks TY -Reave
Reave
November 5, 2005 at 9:16 pm in reply to: On Camcorder Mic Distortion

Hi Matt

Just checked camcorder. I have chanels 1 and 2 in linked position also both chanels
AGC (auto gain control) set to off. As I said levels were not going in the red as I was shooting
and they are not showing in red printed to tape. Could having the chanels linked do that?
Had audio level control set to about half way, and readings were hitting about -8. Reave