Replies – Forums – Rajesh Lad

Forum Replies Created

Rajesh Lad
October 13, 2009 at 11:12 am in reply to: Recovering Deleted Clips

Please send the card to Panasonic Service Dept there phone no is 201 348 7975. They will try to recover the card if it was not recorded.

Thank you
Rajesh Lad
Sales Support Engineer
panasonic
Rajesh Lad
March 25, 2009 at 3:34 am in reply to: 10 BIT HD-SDI Output?

No it does not remove the tag frame you have to use P2 mobile for it.

Thank you
Rajesh Lad
panasonic
Rajesh Lad
March 19, 2009 at 10:33 pm in reply to: P2 Spanned Clip Timecode Goes Past Midnight

There is a Panasonic option called P2 Mobile. It has an editing capablity. All you have to do is select the clip, Open the playlist menu. Go to Setting and make sure you set TC replace then you can set your own TC. Once that done go to menu File Append the selected clip Once the clip is on the timeline as an event. Open Menu go to operation then EDIT COPY to another card and your new clip will have new TC because it generate complete new clip out of your old clip and it will have new TC no computer needed.

Thank you
Rajesh Lad
Panasonic
Rajesh Lad
February 20, 2009 at 2:37 am in reply to: 10 BIT HD-SDI Output?

Panasonic makes the best product just for this purpose. It is called P2 Mobile it is six card recorder if you have 64GB cards rented or purchased then you get more then six and half hour of HD recording using AVC-I 100 codec. AVC-I is 10 bit codec and it can be triggerd by camera using a rec trigger from the HD SDI cable.
So connect your camera HDSDI out to P2 Mobile hit rec trigger on the camera and P2 mobile also record with it. Also if you can remove the 3:2 pull down and record the native 24 frames.
Please check the website
https://catalog2.panasonic.com/webapp/wcs/stores/servlet/ModelDetail?storeId=11201&catalogId=13051&itemId=218163&catGroupId=34402&surfModel=AJ-HPM110&displayTab=R

If P2 Mobile is out of your budget then there is another device we just announced called P2 Portable AG-HPG20. It is also available with the bracket to mount this directly behind the battery on the camera. It has two slots and will trigger from the Varicam.
Please check this out
https://catalog2.panasonic.com/webapp/wcs/stores/servlet/ModelDetail?storeId=11201&catalogId=13051&itemId=327735&catGroupId=34402&surfModel=AG-HPG20&displayTab=O

Thank you
Panasonic
Sales Support Engineering
Rajesh Lad