Peter Groom
4
COW Coins
Forum Replies Created
-
Yep, I always run on batteries wherever possible as venue and hotel power supplies are of “varying ” cleanliness
PeterPost Production Dubbing Mixer
-
Id add, presuming that a sound recordist to drop a short rifle in just out of shoyt is not possible, as this would be best overall
Post Production Dubbing Mixer
-
Id go for personal mics then.
PeterPost Production Dubbing Mixer
-
HI
any clues as to what happened after the clapperboards?
They are at a very sensible and healthy level, then the scene dialogue is way down. How di dthat happen. Why was htis turned down?
PeterPost Production Dubbing Mixer
-
Also, are any of your cables running near any mains or lighting cables,
If you have to cross power cables with audio cables, di it at 90 degrees only, never run alongside.
PeterPost Production Dubbing Mixer
-
Are you running the camera mins or battery?
The hum I’d most likely because you are unbalancing the audio from the board, or using a balanced connector into an unbalanced socket or vice versa at the board,
Try pulling the jack part way out to see if it clears up, or use a different feed. Yu can try lifting the earth too.
PeterPost Production Dubbing Mixer
-
Is it indoors our outdoors.
Peter
Post Production Dubbing Mixer
-
Can you clarify exactly what it is your wanting saving.
is it the low levels, the fact that the 2 people are different levels or the fact that the clatter around a lot throughout?
How was it recorded etc etc . More info?
PeterPost Production Dubbing Mixer
-
Is it supposed to record when you press the record button only. Id thing that would put it into record standby, and need a play command to roll???
Are you seeing an input on the meters / in the headphones ok. (I realise thats different to a non roll issue!)Peter
Post Production Dubbing Mixer
-
Recording a voice over to picture is a good way to go, but theres no need to overcomplicate a simple VO session into an ADR session.
ADR it is not.
PeterPost Production Dubbing Mixer