Replies – Forums – Pengchon Vann

Forum Replies Created

Pengchon Vann
June 20, 2010 at 5:56 pm in reply to: Canon XL1 shut down while taping.

I’ve used the XL1 before and had the same problem.
Solution: There should be an option in the menue that you can set so it doesn’t turn itself off. I believe it is call “power saving” or something related. Just turn that off, and good luck.
Pengchon Vann
June 10, 2010 at 11:15 pm in reply to: My codec for H.264 bitrate problem.

Its an interview.
Pengchon Vann
June 10, 2010 at 9:46 pm in reply to: My codec for H.264 bitrate problem.

yeah thats the problem it is running around 2.68 megabytes per second.
I tried to make it 5 or more megabytes per second by increasing the bitrate setting as you have read in the first post, but after doing all the different bitrate, the video comes out the same size.
Pengchon Vann
June 9, 2010 at 10:53 pm in reply to: My codec for H.264 bitrate problem.

sorry, I meant the 5minute video comes out to about 93 megs, even when the bitrate are changed to anything.
Pengchon Vann
June 7, 2010 at 4:55 am in reply to: h.264 bit rate setting isn’t working correctly

I just tried that exporting a 5 minute video each in different bitrate under H.264 codec.

heres my result.

bitrate 500 = 93,024kb
bitrate 1000 = 93,024kb
bitrate 5000 = 93,024kb
bitrate 20,000 = 93,024kb

I’m runnining out of ideas in how to solve this problem, I don’t know if my codec is damage, or am I doing things wrong.

PLEASE HELP!
Pengchon Vann
June 6, 2010 at 5:09 am in reply to: h.264 bit rate setting isn’t working correctly

The problem is when used the High presents, unfortunately none of these high presets allow me to set my own bitrate. I wanted to use the codec H.264, cause its a codec that have an option to set the bitrate, the DV NTSC and other presets doesn’t have it.

I did a test, and I dont’ think the bitrate is limited.

I tested by setting the bitrate at 100bytes, in a 5 second video. It came out to 1.47meg

Then I tested it to 500 bytes, and still came out 1.47 meg.

Then I raised it to its maximum byes 9999999, and still came out to 1.47 meg with all clips.

(I also notice that the option “codec setting” is in grey and I’m unable to click it.)

Any suggestion?
Pengchon Vann
June 6, 2010 at 12:28 am in reply to: h.264 bit rate setting isn’t working correctly

Not many are sure of this, but I think the bitrate setting for codec H.624 is damage, and may need to reinstall the codec.

Is there a way to download codec H.624 for Adobe premiere pro cs4?

No matter what number selected for the bitrate setting, either 1,000, or 5000, or 25,000… the data video size comes out the same.