[Patrick Taylor]

I was able to correct multiple dead pixels on my GY HD110

am told that letting the camera warm up for an hour or so will reveal more flaws (my pixels show up right away so I did not do this)
I did run this with the lens cap on, with an external monitor that allowed me to clearly see the problem pixels.

• put the camera in 24p mode
• hold down the USER3 and focus assist and Status buttons for somewhere between 2 and 10 seconds.
• a service menu will appear
• select camera 1
• select pixel compen (i don’t remember the exact wording of the menu item but it was pretty clear)
• select EXECUTE

screen changes and indicated that it is working
instructions on the screen came up instructing me to turn the camera off and then turn on again.

On attempting to see the results, I was a bit confused by a completely black image. (small panic)

a little fiddling revealed that the pixel comp had closed down the iris automatically and in my fairly dim room, there just wasn’t enough light to register. I set the full-auto off and on again and got a beautiful, and correct image.

awesome!