Mike Fa
Forum Replies Created
-
Thanks everyone for your input. All the comments have been really helpful and I appreciate it.
-
The difference with station is they are using cs6 and they have the hd 1080p 29.97 setting directly in their quicktime drop down. Where I’m using cs.5.5 and only have SD settings. I have to make a custom preset in order to export quicktime in HD. I’m not sure if that makes a difference or not. But the file size using the same video clips is 15x the size :).
-
I knew something had to be wrong everything I was googling didn’t seem to match what I was looking at. Everything appears correct at boot and everything seems to function properly inside windows. I can access all my files no problem.
One thing to note is late yesterday the old drive that was missing disappeared from the list in windows IRST. Everything still reads 0GB though on both arrays.
Another thing that is concerning is when I run the system report in IRST it says my array = 5.5TB. This is Raid 10 with 4 drives 1.5TB. And it shows my other array to be 596GB when that is Raid 0 with 2 drives 300GB. All the individual discs in the report show 0 but the 2 array groups show the full capacity if you added up each individual drives capacity.
Hopefully this doesn’t cause any errors.
-
-
Thanks for all your help. I really appreciate it. I just got the new replacement drive. I ctrl-i at boot and it immediately recognized the disc and asked if I wanted to use this as the rebuild drive. I selected yes – and got a message that the rebuild process has to be completed in windows. I boot up open up the IRST application and it sees my drive as part of the array but it doesn’t give me the option to rebuild. It is also still showing my old drive as missing. Can you point me in the right direction of what I’m doing wrong?
-
By the way – this is a self build. The motherboard I’m using is ASUS P8Z68-V PRO LGA 1155 Intel Z68 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard with UEFI BIOS. Not sure if this makes a difference. I’ve never rebuild an array before. I’m assuming I would have to get a Hitachi 2tb drive instead of the 1.5 (since I can’t find this drive anymore?) Once I get the drive would it be as simple as just plugging the drive in and the array will rebuild itself automatically? Or will I have to do something to start that process?
-
I can’t find the same drive to replace it with though. That hdd is no longer being sold. So what drive should I get?
