What settings are you using in Compressor? Are you using AC3 audio (Dolby 2.0)? The settings in AC3 will affect the level of the audio comming off the DVD -12, 27, -31. -31 giving the louder output in AC3
There is no such thing as a miniDV audio signal. Mini DV is a small DV cassette. “DV” has unlocked audio. “DVCAM” has locked Audio. DVCAM recorded on a DV tape is exactly the same as on a DVCAM tape,ony 40 min vs 60 min on a 60 min DV tape. DV tapes come in various sizes as do DVCAM tapes. There are miniDV and mini DVCAM cassettes as well as the full size.
It apears that the VX2100 only has a mic level input so unless an adapter was used to convert line to mic level this
would cause the distortion if line level was used as the output on the wireless reciever.
Many wireless systems have mic-line output. If the reciever was set to line out and went into a mic level input
on the camera that is the cause of the distortion.
Must be mic-mic or line to line. Then also headphone monitoring is a must.
Im looking for a layout of Color Bars/tone, slate, countdown, Show open/1st seq, 1st break, 2nd Seq and so on. How many breaks in a 60min program? This all applies to a broadcast format.
The show in question is a one hour cooking show.
For long run analog over several hundred feet use RG11U. Its larger diameter but has a lot less loss.
Also if you are running it thru conduit you don’t need quad shielding. Next best is RG6U.
Use an equalizer line amp if possible. VAC makes some small ones.
For the audio use regular 22ga audio wire. Balanced.