Julius Johnson
Forum Replies Created
-
Thanks, although it is not what I was hoping to hear. I am a little suspicious of the device control in the easy setup. It calls for a Sony VTR A. Doesn’t that seem weird? It is a panasonic deck. Never had this problem with the aja IO controlling a BetaSP or a DSR1500A. But with the Kona and the DVCPro deck it’s a totally different animal.
-
After retracing my steps and modifying some of the sequences used to make this effect I think the error may be that some of my elements had “none” selected for field dominance while later sequences had lower field.
-
Final cut project was set to DV. The effect renders well and plays back as a quicktime fine to an NTSC monitor hooked up to a DVCam deck. It just gets really ugly when I use compressor. I have most recently have goosed the data rate up to 7.9 mbs average at 9.0 max. I am waiting for that compression to conclude that I can burn a disk to see if it works.
-
I did try the animation codec when making the QTs but the error remained. It appears to occur in the compression step. The final is to be projected. I was using progressive 16 x 9 instead of interlaced at every stage of the process.
-
Just as a follow up . . . the Sonnet card is not the problem. The symptoms did not change when I swapped cables and ports. Would it be risky to remove the drives from the enclosed housings and put them in the Sleds for the Burly boxes? Is this something that TechTools could fix?