[Jeff Murray]

I checked and I have Raid Level 0 enabled. It’s accross only two drives and by the sounds of uncompressed 1:1 needs a lot more drives to work.

With my current RAID card I can only go to a maximum of 4 drives in one array.

Does anyone know the write speed required for uncompressed?

My current set up writes at 42,112 kb/s or 41 mb/s, I see some of the SCSI RAID writes at up to 125 mb/s.

Regards

Jeff

[Jeff Murray]

I had green squares in my captured video until I realised that I had the add in ADS Pyro 1394 card in the wrong slot.

I though it was correct but found that on my machine it needed to be in slot 4. It does vary by machine and is worthwhile checking.

Regards

Jeff

[Jeff Murray]

Thanks Alex and Amheus. I have drive filtering unticked.

A most helpful post Alex – I will check my RAID settings and let you know how I get on. I was quoting my settings on memory as I am away from my machine. I did think they were striped, but will double check this.

By the sounds of it, I maybe able to do uncompressed on the SATA Raid then and not require SCSI. I really hope so.

Regards

Jeff