Replies – Forums – Ichie Miller

Forum Replies Created

Ichie Miller
April 25, 2011 at 10:58 pm in reply to: wirecast detect camera but with no preview

Thanks for your efforts
Ichie Miller
April 25, 2011 at 6:29 pm in reply to: wirecast detect camera but with no preview

Ok, starting over
1. Connected the camera then loaded wirecast
2. It was showing the black image and not what was being recorded by the cam
3. I checked to see if the cam was being detected.(Yes it was)
4. I tested if the connection was ok; by closing wirecast and tried FMLE. It was working fine
5. Closed FMLE, re opened wirecast, still not working( I disconnected and reconnected the camera as well as reload wirecast after and before I load wirecast)
Still not working.
6. Tried reconnecting again then suddenly I got a feed from the camera. I seemed to be working now.
7. I wanted to ensure that it will work from now on, so I disconnected and reconnected.
8. There goes the problem again.

That’s how it all went, and until now its has not worked.
The dialog box thing is as u said, just opening the previous settings.
Ichie Miller
April 25, 2011 at 5:36 pm in reply to: wirecast detect camera but with no preview

I rustled with it, then it started to work, then to ensure that I could use it without a problem later I disconnected it and shut down wirecast. I then brought it back up and once again the same thing.

As for the dialog box; the settings where saved with the camera attached so on execution it said that those devices were not detected.

When I have the camera connected before wirecast reload it just detects everything and no dialog box appears
Ichie Miller
April 25, 2011 at 5:04 pm in reply to: wirecast detect camera but with no preview

Nothing different happend, I just don’t understand what could be wrong all the settings are the same as 4hours ago yet still it refuses to work.
I tried changing the aspect ratio also and nothing changed. When I connect the camera then launch wirecast a dialog box appears. It has an area for me to choose the devices and a drop down box for me to assing watever I choose to the device. Also I have the option to delete the device.
Ichie Miller
April 25, 2011 at 3:32 pm in reply to: wirecast detect camera but with no preview

I only had a mouse in one of 3 usb port, I removed it and its the same result.
I need to add though that flash media encoder does not have this problem at all.
Once I connect the usb cable it detects it right away.
Ichie Miller
April 25, 2011 at 3:07 pm in reply to: wirecast detect camera but with no preview

I’m not using firewire, usb is what I’m using this camera has firewire but it does not work for streaming at all. By preview I mean in the main shot list all that is there is a black shot. When I click the shot there seem to be no feed from the cam. After a few switch on and off as I mentiond before it may or may not show.