[Iain Johnston]

Hi Ian

I have imported directly from card and via the BPAV file on my Hard Drive and the same thing happens. I noticed this as soon as I got my Camera and called Mitcorp in Glasgow. The same thing happened with them.

I can use Sony XDCAM transfer for my HD Footage but have no way of transferring SD footage! which leaves me with a problem.

Camera firmware version (V1) I’m told this is the most up-to date software

Type/Size of media (MxM Adaptor with ScanDisk 32 GB Class 10 and Sony SxS 1 type Card

OS Version (e.g. 10.6.4)

FCP V 7.0.3

Hope this helps.

Cheers Iain J

[Iain Johnston]

[Iain Johnston]

Hi Ian

thanks for the reply to my post, I’m not sure where to start but here goes, The EXDCAM Transfer that Sony supplies works fine if I use HD, but some of my customers want me to film in SD thats why I purchased a 320 and not a 350.

When I use the L and T in FCP 7 the clips on the first card are fine, however if the clip spans onto the second card the scene splits into 12min clips.

I have attached screen grab for you to look at!

[Iain Johnston]

I am reading this thread with interest, I downloaded this software from the same site, XDCAM EX Log and Transfer plug-in PDZK-LT1 V1.20 for MAC OSX However when I try and log and transfer SD or HD footage from my cards the first card is ok, but the second card splits the scenes into lengths of 12min in HD and 9min in SD it only happens when the scene spans over to the second card! The first card is fine!

Everything is fine if I use the Sony XDCAM Transfer software but only when importing HD it just doesn’t see SD Footage at all!

Anyone having a similar problem! I’m using a Sony PMW 320 with MxM Adaptor with 32Gb Scandisc Cards and I also have Sony SxS Cards and the same think happens.

Cheers Iain J