Replies – Forums – Dean Weily

Forum Replies Created

Dean Weily
April 7, 2016 at 2:43 pm in reply to: Vegas 13 stops rendering without a crash

I think I discovered the problem, now I just have to figure out how to fix it . I need to attach the drives temporarily to regular SATA ports and do a firmware update. if I read the instructions correct , I have no idea what that even means regular sata ports.

‘A Firmware update is needed for Seagate ES series drives connected to ATTO Express SAS Host and RAID Adapters

ATTO has become aware of drive errors on Seagate 1TB (ST31000340NS), 750GB (ST3750330NS), 500GB (ST3500320NS), and 250GB (ST3250310NS) drives. These errors may cause RAID groups to fault or go offline with ATTO ExpressSAS RAID adapters. These same drives may go off line with ATTO ExpressSAS Host Bus Adapters.

These issues are resolved on the above drives by a firmware upgrade to revision SN06. This firmware cannot be used on an AS series drive.

The links to the Barracuda ES.2 SN06 SATA firmware file and a program to create a bootable USB drive are below. A PC with an on-board SATA controller and an external USB bootable drive are required for this update.

You may use either USB Boot Maker FD 1.4.zip or the method described in “How to create a bootable thumb drive (USB) drive” below to create the boot drive. Extract the contents of Barracuda ES2 SN06 release.zip to the root of the USB drive. Boot the USB drive and choose the option for the capacity point of the drive you are updating. The SeaFlash utility only works with common SATA chipsets and ports available on today’s motherboards and therefore will not see drives attached to the ATTO ExpressSAS RAID or Host Bus Adapters. You will need to attach the drives temporarily to regular SATA ports.

Note: This SN06 firmware is only for the above SATA models when attached to ATTO ExpressSAS RAID or ExpressSAS Host Bus Adapters. SATA models attached to internal SATA controllers or non-ATTO SAS controllers do not need to be updated to SN06.
Dean Weily
January 20, 2016 at 2:44 pm in reply to: Need Driver for [defunct?] Bella Corp Vegas DV Keyboard

Jog 🙂
Dean Weily
January 20, 2016 at 2:44 pm in reply to: Need Driver for [defunct?] Bella Corp Vegas DV Keyboard

Is there a way to set the job rate, I would prefer to go one frame at a time,

Thanks anyone
Dean Weily
October 24, 2010 at 12:43 am in reply to: Sony Firewire

Unfortunately No, I had thought of that
Dean Weily
July 18, 2010 at 2:11 am in reply to: Sony Vegas EDITOR

Sorry dont fancy sending 300 gigs of raw vision, If I could I would.
Dean Weily
July 18, 2010 at 2:10 am in reply to: Audio stutter after upgrading to Vegas 9.0e

Did you fix this issues I am having the same problem
Dean Weily
March 21, 2010 at 5:04 am in reply to: Vegas 9, AVI, Quicktime MOV.

Yes I have tried that , but NO codec shows up, the video side of gspot is empty, the file plays in vlc but little else
Dean Weily
March 20, 2010 at 9:32 pm in reply to: Vegas 9, AVI, Quicktime MOV.

Yes I was trying to reload the MOV files, it seems such a long way around to convert to make them work, the original QT I cannot find out what codec they are using, (or can I) .
(oh also cant export in the final rendewr 4 channels of audio in qt, this is needed for deliver) If anybody was in Los angeles, I would pay well for a consult onsite.

Dean Weily