Looks like we may have a bad tape causing the problem. I did another pass with the cleaning tape then used a new tape and it was fine. I then tried the original tape (new from the same shipment) I had been using when the error happened and I had the same problem where there was an error and the cleaning light came on. I put the first tape back in and all was fine.
Another problem that’s cropped up is that I had to replace a failed drive in the raid. I put it in and, after not seeing any dialog boxes, left it alone to see if it would rebuild itself. It didn’t and when I went into the terminal today to see if changing the raid type would help, it said “Second HDD is missing (/dev/sbd)”.
I took the drive out and it was hot like it had been running. Is there something I need to do to ensure that the Cache-A is seeing the drive?
Thanks,
Darren