[Clemens Schweder]

Dear Eric,

you pointed me to something.The LUNs.

That is the problem. I resolved it.

So Apple removed the LUN Masking in the 1.5.1 RAID-ADMIN.
In the 1.5 RAID-Admin they are still present.

The trick is to go with the the RAID-Admin 1.5 into LUN Masking under extented and disable the LUN-Masking.

Than Restart the RAID and the Host-System and viola
i can see the RAID in Disc-Utility. And i can format them and it works.

Thanks Guys

So the bought Seagate 750 GB ST750640A are working on (they do not come frome Apple) a Xserve RAID 2003 as a RAID 5 with the amount of 3,4 TB of Space on a Xserve G4 !! I configured 6 Drives with RAID 5 it takes about 70 Hours to create the array.

It’s described in the Apple Discussions

—

[Clemens Schweder]

Hi Guys,

can tell me anyone how to get it work with this Seagate Drives.
I found nothing else.

I’m using a Xserve RAID from 2003 with at the moment 14 Hitachi Deskstar 180 GB Drives which come directly from Apple.

Now we ordered a few ST750640A p-ATA Drives with Firmware 3.AAE.

Over RAID-Admin i can create an Array of the discs but can’t see them in Disc-Utility.
In System-Profiler the Xserve RAID is known.

I use a G4 Xserve but it didn’t worked in an G5 Xserve too.

Any ideas??

—