[Baule Alessandro]

Do you are to be use a thunderbolt to Ethernet 2 ports 10gbe to connect a 1 gbits switch?

If yes, because do you don’t use other Ethernet card pcie?

For 1 gbits Ethernet don’t necessit sysctl config.

[Baule Alessandro]

Hello,

The mechanics is:

Lagg Ethernet – only with same Ethernet velocity, prefer same chipset in the board, (2 x 1 gbits or 2 x 10gb), the mix of the link velocity the system will be based for the link more slow, how all the system work for the more slow, this is valued for memories ram mixed, hds mixed raid, etc.

Files corrupt, look the ram memory’s and the healthy Hds, transfers about network don’t corrupt files in the server.

My system work about the freenas server, with 2x 10gbits Ethernet, one 12 ports 10 gbits switch Netgear, and all HDS in the Freenas are Hibrids HDs Seagate 4TB.

In network mechanicals, all macs thunderbirds Ethernet adapters are connected in the switch 10gbits, and one port is uplink in the other switch 1 Gbits where are connected all 1 gbits machines, the lagg 10gbits are connected directly in the 10gbits switch together with macs.

The system are done for 4k edition simultaneously, mixed with other stations prores 422 edition and other machine making upload of the media files for workflow.

The videos editions are Adobe Premiere and FinalCut, the PCs work with After Effects and others effects programs, and all this working simultaneously .

Remember, for Ethernet 10gbits use 6A cables categorized is fundamentals.

[Baule Alessandro]

I think that the problem is more with macosx and 10 gbe particular.
The migration From 100 to 1000 gbps was more easy, but now for 10gbe have very complications.
The line to way is flow control, sysctl in macosx, and mtu 9000 to all adapters and switch?
Have a secrets from macosx to all work ?
Definitely 10gbe don’t is plug and play.
Thank you very much for your attention .

[Baule Alessandro]

The Promise dont have Jumbo Frames (mtu 9000)
My server is a Freenas – BSD Based
The server is set mtu 9000

i think that mac make a cache for play files, and when the video freeze the mac dont access the server, i see access in the “server disk” like zero mb/sec.

Have a special config for premiere works in the 10gbe?

thanks

PS we use a AFP protocoll

[Baule Alessandro]

The Promise dont have Jumbo Frames (mtu 9000)
My server is a Freenas – BSD Based
The server is set mtu 9000

i think that mac make a cache for play files, and when the video freeze the mac dont access the server, i see access in the “server disk” like zero mb/sec.

Have a special config for premiere works in the 10gbe?

thanks

[Baule Alessandro]

Hello,

I buy 9 sanlink2 10baseT for work with Netgear XS712T Switch and a FreeNas Server with dual 10Gbe ports RJ45.
The Server is OK, transfers about 1`gbps is ok, the Macs for Video edition with Adobe Premiere works great, is possible edit and play in file videos together.

Now we make the migration for 10gbe and nothing more works, don’t is possible play in the files in the Premiere, the video freeze, dont together with sound, delay all.

Please, help with this support, are 9 Sanlink adapters that dont work in 10gbe.