[Anthony Derose]

Hey Todd,

Thanks for the clarification.

To confirm – on those camera’s where I can set the shutter to angle instead of speed I don’t have to make any change when adjusting frame rate, since the camera will automatically compensate?

However

If I am set to shutter speed instead on one of those camera’s, I will need to make that adjustment to the speed?

For example on the Mk II if I’m at 180 and frame rate at 60fps nothing needs to be changed as it automatically compensates? Where as if I am at 1/48 speed on the Mk II and shooting at 60fps I should make sure to adjust shutter to 1/96?

http://www.anthonyderose.com

[Anthony Derose]

Hey Rich

Thank you for responding, I’m still lost with it. Basically if I’m going recording out to my kipro does that option need to be enabled to let me record 422 Prores HQ 10Bit? The kipro itself lets me dial that all in and I figured if those setting are applied and I have enabled the option on the F3 HDSDI Remote I/F which lets me record to a external device I’d be golden.

But I dont know if I need to have the 1.5 setting since it will eventually be the point to let you record out S-Log and list 422.

Sorry for the confusion.

http://www.anthonyderose.com

[Anthony Derose]

Looking back at my question I didn’t explain myself very well.

What exactly does it mean when it says dual link? Do I need to run a SDI out of both a & b into the recorder so its works properly? Or can I with dual link on just run one single bnc cable out of SDI into the kipro mini.

Better yet if I just keep that setting (1.5G YPbPr422 & Video) off and have the bnc running out of the SDI to the kipro will it still shoot prores HQ 1920×1080 422 10bit (of course these setting need to be enabled on the kipro)

http://www.anthonyderose.com

[Anthony Derose]

I forgot to mention that is for the dual-link & gamma select option

http://www.anthonyderose.com

[Anthony Derose]

Thanks, I’m just taking h264 through mpeg stream clip to create pro res files for the editor. I knew there was very little difference look wise between hq and standard but just wanted to double check.

thanks

http://www.anthonyderose.com

[Anthony Derose]

Thanks. My only concern is as it travels through generations (coloring, etc) wont the basic prores ose quality? Thats why I was thinking hq would preserve it better.

http://www.anthonyderose.com