[Andre Cruz]

So, for anyone encountering the same issue… After 4-5 successful uploads without any issues, i think i am sure to say i’ve fixed it.
What i did was starting to convert the footage into constant framerate @660fps via Handbrake. The reason for this is that sometimes the footage would show 59,xFPS or 61FPS, something along those lines – instead of the 60fps it should show.
An additional step i am taking now, is to work in a 1600×900 sequence with the 900p material and rescaling by setting the output to 1080p opposed to working in a 1080p sequence and rescaling the source material via “Set to frame size”. Not only does this apparently fix my issues but it’s also easier for my workflow, since clips are now 100% and not 120% due to the mentioned “set to frame size” option.

So, i am unsure of which step fixed my issues (although i’m almost sure it’s the conversion), but it’s fixed and i hope this can help someone out there.

Thanks for nothing, pretty much 🙂

[Andre Cruz]

“As the editor, you need to communicate your needs to the content creators so that the edit can have a smooth workflow.”

First of all, it’s stream footage and he’s just not able to stream at 1080p.
Second of all, i already said i’ve beeen working with this source material for month straigth, so stop going the “it’s your source material, just change it” way.

[Andre Cruz]

Well, someone’s not reading properly… I said i am an Editor for the channel, so i have no control over the source material and it being 900p. But as i also mentioned, i never had these issues in any videos before with the same source, so it shouldn’t be the resizing nor the VFR.

Still, i will try exporting in CineForm and will report back. Thanks for the help so far!

[Andre Cruz]

Since i can’t edit apparently…

Here’s a frame in a new video. It’s a comparison between source and rendered video.

Source: https://imgur.com/a/by6wb8i
Rendered output: https://imgur.com/a/BQ2juwL

You can see the blocky artifacts… And you can see it doesn’t affect everything on the screen whenever it occurs. Sometimes it happens on the facecam too, sometimes it doesn’t (like in this example).

Output and sequence settings: https://imgur.com/a/tCMMOqk
Source properties: https://imgur.com/a/C0kWA77

I am aware that i am resizing 900p into 1080p and also i know the source is VFR. As i mentioned before tho: i have never had any issues before and i did not change any settings. The source is still being captured the same way and so on.

Source

[Andre Cruz]

So, after several tries.. “Software only” does NOT fix the issue…

Also “There’s so much going on in the frame in each video that it’s nearly impossible to spot the issue.”…
Are you saying your eyes can’t spot the difference between normal frames and corrupt ones? Set the playback speed to 0.5 and you’ll see.

I am re-installing premiere pro and media encoder now… This ist getting hairy slowly…

[Andre Cruz]

Source Footage is VFR, as i said, no settings changed since when everything was fine. It seems that using Software Only encoding in Media Encoder fixed the issue, so it’s apparently my GPU having issues rendering…