Aidan Clayton
Forum Replies Created
-
I wanted to record directly in Audition CS6 for a project so need to get a signal from 552 to the PC.
-
I have the 552 so so may as well use it on the PC when needed. I did have a USBPre 2 and if needed will definately grab another.Thanks.
-
It is all as it should be now. Thank you so much for taking the time. Is there any training where I can get up to speed on this mixer past the instruction manual?
Thanks, Aidan
-
Hi, thanks. Much better than before. It sounds more balanced now having also changed the cable so the signal is coming out via two xlr inputs. This has thrown up another issue where I’m getting dual stereo instead of
Mono left on one channel and mono right on the other. This must be my cable wiring though so will order a cable made up from 3.5 stereo mini to two xlr mono plugging into separate channels for left and right. Does this sound the right way to go? -
Phantom Power is off. I will look into a new cable just in case.
-
From the “Audio Out” on the PC which is an HP Z420
This is on the motherboard and is a standard 3.5 computer output. I doubt if it’s line level but cannot find any other data on it. -
Hi, I’ve tried both and mic level takes the edge off but is still way too sensitive. Also when monitoring through headphones on the 552 without the monitors on, the signal still sounds rough compared to plugging the headphones directly to the headphone jack of the PC.