• Canon Cameras

  XL-H1a Double Image problem

  Posted by Mike Johnson on March 23, 2009 at 4:21 pm

  Just wondering if anyone would have an idea of what caused this (see image below). The beginning of the interview had no problems. About 5 minutes in it slowly became soft and a double image appeared. It took about 1 minute for this to happen. After about a min, the image slowly cleared up and went back to normal.

  I initially thought it could have been condensation on the lens, but the double image didn’t appear until just over 5 minutes into the interview. Condensation would have appeared almost immediately after taking the camera outside.

  Some specs about the camera settings: F-stop 2.6. Shutter 1/60. Image stabilizer off. The camera was locked down on a tripod with no operator. Auto exposure, auto focus.

  Any ideas?

  

  Mike Johnson
  
  Final Cut Pro Editor
  
  Drury Outdoors
  
  http://www.druryoutdoors.com

  

  Mike Johnson replied 17 years, 1 month ago 1 Member · 0 Replies
• 0 Replies

Reply to this Discussion! Login or Sign Up