• Adobe Audition

  Using Audition to meed broadcast specifications

  Posted by Jonnie Lewis on February 14, 2013 at 4:10 pm

  Hi all,

  I’m in the middle of my first TV spot project. I have a spec sheet that details the following.

  Average Digital Audio Levels:
  Between -16dBFS and -20dBFS with high peaks between -10dBFS and -12dBFS and a maximum of three peaks per second.

  I’m not really all that familiar with Audition but it doesn’t seem that these specs should be all that hard to cater for. Any ideas what my approach should be?

  I’ve seen this:

  https://boodahjoomusic.com/blog/?p=1089

  It should prove to be helpful in terms of the ITU-R BS.1770-2 Loudness standard, but I still need to control my audio to the above specs.

  Many thanks,
  Jonnie.

  Jonnie Lewis replied 13 years, 5 months ago 1 Member · 0 Replies
• 0 Replies

Reply to this Discussion! Login or Sign Up