Activity › Forums › Apple Final Cut Pro Legacy › Stop Motion Set up with FCP 5
-
Alan Lacey
January 26, 2008 at 7:09 pmthats good news, as I’ve always be reluctant to hammer my Nikon with a lot of stop frames.
Thanks
Alan
-
David Bogie
January 27, 2008 at 6:03 pmWe shot for ten years with our Nikon F3s on high speed motor drives in the worst possible conditions (dust, snow, rain, hot, cold). Never had a shutter go bad on us. Our Nikon D1 and D2 have more than 30,000 exposures on each.
The new D3 has a live video port that sees through the lens without the mirror being flipped up. I have not see this in action, only read about it.
Here are some links I post for stop-motion and timelapse inquiries:
https://visibleearth.nasa.gov/view_set.php?categoryID=2363
https://www.kenstone.net/fcp_homepage/time_lapse_article/time_lapse.html
https://www.gethincoles.com/
https://www.creativepro.com/story/howto/24670.html
https://www.haworth-village.org.uk/nature/time-lapse/thumbs.asp
https://www.macworld.com/weblogs/macosxhints/2006/07/timelapsemov/index.php
https://digitalmedia.oreilly.com/2005/05/18/timelapse.html
https://www.timelapsedigital.com/bogiesan
This is my standard sigfile so do not take it personally: “For crying out loud, read the freakin’ manual.”
-
Alan Lacey
January 27, 2008 at 7:23 pmHmmm perhaps I rushed the purchase of my D2!
That’s very encouraging Bogie.
Alan
-
Rennie Klymyk
January 28, 2008 at 6:29 pmNikon tests all pro cameras for 150,000 firings before going into production assembly. Consumer cams are tested for 100,000.
“everything is broken” ……1st. coined by Esther Philips I believe.
Reply to this Discussion! Login or Sign Up