Quadro FX560

[Tim Kolb]

I’ve not used a 560, but keep in mind that you can preview out the AJA card or use a desktop video overlay, but they don’t both work simultaneously.

I can’t use my FX4500 for overlay and the Xena card at the same time…

TimK,

Kolb Productions,
Creative Cow Host,
Author/Trainer
http://www.focalpress.com
http://www.classondemand.net

[Jerry]

I can’t use my FX4500 for overlay and the Xena card at the same time…

The Xena output would feed the monitor, you still get a desktop overlay from the video card,
don’t you.

Jerry Hatfield
Six Gill DV
Orlando, Florida

[Tim Kolb]

Yes…I have my desktop.

I am running a four head system with a 24″ and two 17″ panels for interface and a 30″ for video overlay. With Prospect 2K I can get a pixel-for-pixel representation on the 30″ panel.

Overlay only goes to one place however, and from what I can see, when I have the Xena installed, Prospect ships the video in that direction and the 4500 feed to the 30″ is gone. I have a dual-DVI switch coming so I can switch the 30″ feed from the Quadro card to the SDI output.

TimK,

Kolb Productions,
Creative Cow Host,
Author/Trainer
http://www.focalpress.com
http://www.classondemand.net