Print To Video

[Tom Wolsky]

I understood, what exactly are you doing and what happens when you do it? Don’t know what the timecode is completely messed up means, or the tape skips around.

All the best,

Tom

Class on Demand DVDs “Complete Training for FCP6,” “Basic Training for FCS2” and “Final Cut Express Made Easy”
Author: “Final Cut Pro 5 Editing Essentials” and “Final Cut Express 4 Editing Workshop”

[Hector Berrebi]

smith

your post is a little confused..

can you supply more details?

and make sure you put your project into HDV easy setup.

can make magic sometimes

good luck

Hector Berrebi
Schibber Group
prePost Consulting

[Smith Glover]

thanks for your responses. my problem this; i lay off to tape, using a front slate and color bars, which are on the timeline. when i try to play back the tape on my deck, the color bars and slate play back perfectly. but once the actual video starts in, the time code, as read by the deck, goes blank, and the begins to randomly skip around. the video starts and stops, and plays back in a herky-jerky fashion, almost as if it’s skipping around like a dvd. it’s odd. it’s happened on a few tapes, and the deck plays back other tapes just fine- just not the ones i laid off. i hope that is clearer. thanks again for your help.