-
NXCAM Linking XLRs
I am still really confused after watching a training video and reading the NX5u manual on how to have one XLR mic link to both left and right channels. I am using the camera to stream a Wirecast project and would like to have the signal coming in on both channels.
It’s probably something staring right at me but I’m not seeing it. Any help would be greatly appreciated.
Thanks in advance,
Bob O’Hearn
-
2 Replies
-
Bob,
It is.
Go to the flap door on the left of the camera with the sound controls.Open it Top left switch says int mic or input one (to go to channel 1) Select input 1.
Botton left switch says input 1, or internal mic, or input 2 (to go into channel 2) This switch actually has three choices but is confusingly marked.
Select input 1.Now xlr input 1 goes to channel one and to channel 2.
John
John Lenihan
LeniCam Video Productions
https://www.lenicamvideoproductions.com -
John,
Did the trick! Thanks so much for your help.
Bob
Reply to this Discussion! Login or Sign Up