message

[Stephen May]

Ron, If you mean the video gain (sensors) – I’m not getting that message, and am able to set the three settings, however, if you mean the audio gain settings for mic input CH 1 and CH2, you must have the switch on the rear of the camera set to EXT (external) in order to adjust those. -s

Stephen May
Keystone Media Productions
Freelance Videographer

[Craig Seeman]

You probably have Direct Menu set to All. Go into the menu Others/Direct Menu and set to Part.

[Stephen May]

Craig – what does that mean, and what’s the difference between ‘all’ vs ‘part’?

Stephen May
Keystone Media Productions
Freelance Videographer

[Craig Seeman]

It’s menu control.
If one tries to change the Gain setting using the controls on LCD you can get “cannot proceed” unless you go into the “Other” menu in the camera and change Direct Menu to Part which allow you to make the change using the LCD.