Lhi – no audio out or ref in

[Gary Adcock]

[David DuBois] “Has anyone got any ideas on what’s going on? “

since you don’t mention any specs about anything it is hard to answer.

Have you set the Kona Control Panel to the audio source you are working with?
the default would be HDSDI for audio and video,so how are you connected.

Changing the slot the card is in would change the config on the card back to the factory defaults.

gary adcock
Studio37
HD & Film Consultation
Post and Production Workflows for the Digitally Inclined
Chicago, IL

https://blogs.creativecow.net/24640

https://library.creativecow.net/articles/adcock_gary/AJAIOHD.php

[David Dubois]

HI Gary

Sorry about lack of specs.

Macpro 2×2.66 Quad core xeon
10GB RAM
OSX 10.5.8

FCP 7.0.1
Lhi (7.5 driver)

…I think that’s everything you’ll need, if not just ask.

I’ve been through the Lhi control panel but the only audio output options I can see are in the ‘setup’ menu and are ‘Lock audio gain to utility’ (which is ticked) and then ‘analog audio monitor level’ (which is set to -18dbu FSD’.

Thanks
Dave

[David Dubois]

Well whodathunk it…

AJA support suggested I’d connected the umbilical cable on upside down and low and behold I had.
I didn’t think you could connect cables on upside down these days without bending pins but you can.

The strange thing was that even with the connector on upside down I got a perfect video output. Bizarre!

For reference, incase anyone else has this issue, the cable connector has ‘AJA’ printed on the topside.

More haste, less speed.
Dave

[Gary Adcock]

[David DuBois] “AJA support suggested I’d connected the umbilical cable on upside down and low and behold I had. “

Isn’t it nice to get someone on the phone?

gary adcock
Studio37
HD & Film Consultation
Post and Production Workflows for the Digitally Inclined
Chicago, IL

https://blogs.creativecow.net/24640

https://library.creativecow.net/articles/adcock_gary/AJAIOHD.php