HDX 900 Bat settings

[Robin Probyn]

I heard its the same setting as IDX Endura 10

[Ray Palmer]

I don’t ownn any IDX batteries. I did just go on the Internet and saw that they were running 14.2 volts for some of them.

I believe that the battery setting on the camera is to show you when you have a low battery. You should be able to see if your batteries are running 14.2, 14.4 or above.
Typically the cameras like to run at 12 volts. The original PB90 batteries were rated at 12 volts but when they were “loaded” the voltage dropped below 12 volts. That is why AB and others run at 14.4 so when loaded down with lights and camera, the battery is still well above 12 volts.

Ray Palmer, Engineer
Salt River Project
Phoenix, AZ
602-236-8224 office
There are three types of people in this world, those that can count and those that can’t.

[Robin Probyn]

Ok thanks for the info