-
EX1, 24P, and NTSC 29.97
I’ve been combing the forums and can’t seem to get a direct answer.
Can the EX1 film 24P, like the HVX or HPX that adds a 2-3 or 2-3 pulldown?
From what I gathered from the Sony site, yes, but the frame is 1440×1080.
-
2 Replies
-
The EX1 only shoots square pixel 1920×1080 in 24p. The EX1R has a 1440×1080 anamorphic mode but not the EX1. Both cameras record true progressive 23.98fps (24p) to the cards but output 24psf from the SDI port for a smoother picture on a 29.97fps (30p) display.
psf = progressive segmented frame – essentially an interlaced stream but a complete picture for every frame.
Did I get it right, folks? I’ve never shot or edited 24p.
– Don
-
Señores
Si fueran tan amables de ayudarme, tengo toda una secuencia grabada por error en 1920×1080 a un Vid rate de 29.97 fpr(XDCAM EX 1080p30 35 Mb/s VBR) y quisiera pasarla a 23.98 fps (XDCAM EX 1080p24-35 Mb/s VBR)
Que debo Hacer. Agradezco de antemano su colaboracion.Lords
If they were so kind to help me, I have a whole sequence 1920×1080 mistakenly recorded a rate of 29.97 fpr Vid (XDCAM EX 1080p30 35 Mb / s VBR) and would like to pass it to 23.98 fps (XDCAM EX 1080p24-35 Mb / s VBR)
What to do. I appreciate your help in advance
Reply to this Discussion! Login or Sign Up