-
Configuration question before buying ATEM TV Studio Prod Switcher
I have a question before buying this. I have a Canon C100 which when hooked to my Intensity Pro shows up as 1080i. (?) Worked fine with Wirecast though. I want to buy the ATEM TVPS and also hook up a Canon XF305 probably via SDI or if needed HDMI (the HDMI cables fall off too easily from the cameras). I understand that the switcher expects the *same* feed. Has anyone actually hooked a C100 and some other *standard* 1080p HDMI camera like an XF305 or XF105 or XA25 to the switch? Any gotchas?
Thanks in advance.
Al
-
2 Replies
-
https://www.blackmagicdesign.com/products/atemtelevisionstudio/techspecs
This will still be 1080i. The Atem TV Studio wont handle the 1080P.
Eric-ADK
Tech Manager
support@adkvideoediting.com -
Gotcha. I just actually looked and my xf305 shoots 1080i at 60fps. So that will match the C100’s output apparently. (posting this for other’s who may have similar question). I’ll go ahead and order one, and get back to folks about what I find.
Al
Reply to this Discussion! Login or Sign Up