-
BMD issue or PPro?
I’m hoping someone can shed some light..
When Exporting to tape (SONY DIGIBETA via Decklink SDI) from PPro2 I often get a situation where I enter the in/out points, etc in the ETT panel, then hit export and it pauses and then the ETT window pops back up with nothing entered/exported. I’ll set it up to go again and it’ll work fine..other times it’ll keep cycling through this until I have to restart PPro or reboot my PC before it’ll work.
Not ideal working conditions! Can anyone tell for my symptoms if this is a PPro problem or Blackmagic?
Thanks,
Jim.*Production Studio Premium CS2 / *Combustion 3 / Mocha v1
————————————-
Win XP Pro SP2 / Intel P4 3GHz / 2GB RAM / GeForce FX5200 / DeckLink Pro / Roland DS-5 monitors / Sony BVM-20G1E / DVS SDI Clipstation / Wacom Intuos 3 A4 / 110GB boot/80GB media/600GB RAID-0 -
2 Replies
-
Anyone care to try answer this please?
*Production Studio Premium CS2 / *Combustion 3 / Mocha v1
————————————-
Win XP Pro SP2 / Intel P4 3GHz / 2GB RAM / GeForce FX5200 / DeckLink Pro / Roland DS-5 monitors / Sony BVM-20G1E / DVS SDI Clipstation / Wacom Intuos 3 A4 / 110GB boot/80GB media/600GB RAID-0 -
Hello!
I can confirm this problem. Export button triggers “Edit mode” light on vtr but nothing more. After few seconds ETT requester reappears and then (usually) export to tape runs ok. Sometimes ETT works ok first time (but sometimes U have to rerun it few times) so actually it is necessary to input IN timecode again and again and again… Heh, copy and paste does not work in ETT requester somehow.Robert Falkowski – http://www.mmstudio.com.pl
—
System: Win XP Pro SP2 (Eng.), Edit soft: Adobe CS3 Premium, Video: BM-D Multibridge Pro (rev1), CPU: Q6600, chipset: P35, RAM: 4GB RAM, VGA: 8800GTS, HDD: 1x250GB + 4x500GB raid0, VTR: BetacamSP: UVW1800P, Dvcam: DSR-11P.
Reply to this Discussion! Login or Sign Up