-
Anyone know how to activate “dead pixel detection” on GY-HM700?
I have a dead pixel and have found out how to get to the advanced menu, where there is a “dead pixel detection” menu item (I have learned through other posts that this is where it can be fixed). However, when I cursor down the menu, it skips over this function. Is there a way to activate this function?
Thanks
Anthony -
3 Replies
-
Anthony
I had a ? Regarding my 700 and Robert was very helpful. I\\\’d give him a try.
Robert Yarosh
Senior Regional Sales Engineer
630-692-7681
630-235-9125 Cell
ryarosh@jvc.comjon
Jon Leyse
Crash 31, LLC
http://www.crash31.com -
Will do. thanks Jon!
-
I have tried this, or a version of this, before on my gy-hm710U and have gotten it to work. Now I am having no luck.
-Set the camera to 720 60p HQ
-Turn the camera off
-While holding down the display button turn the camera on
-Press the Menu button while pressing the Focus Assist button (the FA button on the side, not on the handle)
-Advanced Menu will be displayedTHAT’S were I get stuck. Instead of displaying the Advance Menu, I get
— VERSION —
FIRMWARE SPL2442 V0101
►EXITI have tried HD 1920×1080 24p, SD 60i and along with the other flavors of video available and get the same result.
Months ago I was able to get to the Advanced Menu and Pixel Compensation function so I am not sure what has changed.
Remembering back when it worked, I thought one of the 3 user buttons came into play but I can’t remember how or when.
I know is is an old issue but any additional help would be appreciated.
Thanks,
JC
Reply to this Discussion! Login or Sign Up