480p captures with Kona 2?

[Arnie Schlissel]

Same as they were last week. Scroll down 7 threads.

Arnie
Now in post: Peristroika, a film by Slava Tsukerman
https://www.arniepix.com/blog

[Brad Bussé]

I read the LHe thread, but I need to capture 480p via component.

[Bob Zelin]

If you have an AJA Kona 2, you have no ability to capture analog component, so you need a CONVERTER that will convert analog component into SDI.

AJA HD10AVA will do this for you.

AJA I/O will do this for you.

Isn’t there something cheaper – no.

Why don’t they just make a box that does everything – they do – it’s called the AJA I/O HD.

If you are working with analog video, and no HD, you are better off with the Kona LHe or AJA I/O.

Bob Zelin

[Brad Bussé]

Hmm, okay I have an HD10A that I use for capturing HD, but it doesn’t get a signal when I try and input 480p into it and set FCP to capture from AJA 525. Do I have to also purchase a D10A just for 480p SD component? I would like to capture 480p60.

[Bob Zelin]

Saddler –
this is what you are going to do right now. NO SLEEP FOR YOU until you look at this –

https://www.aja.com/html/products_converters_mc.html

This is the AJA Mini converter line. See that ? The AJA HD10A will not accept a standard def analog component signal, but the HD10AVA WILL ACCEPT a standard def analog component signal and turn it into SD-SDI. This SD-SDI signal can now be put into your Kona 2 SDI Input, where you can capture your analog component information.

START READING.

Bob Zelin