-
4 channel edit to tape issues
Hello all,
FCP 6.0 trying to output 4 track master.
all tracks are routed correctly both on the time line as well as the sequence audio settings, sony VTR selected and I can see 4 tracks playing back on dbeta deck when playing off the timeline.
When I go to “edit to tape” FCP only selects ch1&2 and all other tracks are greyed out.
I’ve trashed preferences, restarted, etc.
This is for Broadcast so “print to tape” is not an option.
I can always punch in 3/4 at the deck, but that seems a bit ridiculous.
any thoughts would be appreciated.
patrick
-
2 Replies
-
How many audio channels appear in the Edit to Tape Window? Check your Device Control Preset under – A/V Settings and make sure you are using an appropriate setting with 4 channels of audio!
Hope this helps
j -
Forgive any redundancy, but this is what I check when I have this problem.
Make sure you have all tracks set to 4 channel dual mono in your sequence audio settings. (cmd-0).
Make sure you have each tracks output assigned to the correct track you want to lay back to
(option-click to the left of each track name on the sequence and select ‘audio outputs’ to assign them).That’s all I gots. Good luck!
Reply to this Discussion! Login or Sign Up