-
16g p2 do not mount on MAC pro
Hi guys, i m in front of a problem that i cannot fix. I have a 16 g p2, that i already format and shoot 2 clips on it. Then i plug my firewire to import ( i have fcp 6, and a hvx 200) but the card doesn t mount to the desktop, so impossible to import in fcp i suppose. I check disk utility ( i m on mac pro), i also installed the lastest drivers on the mac. Nothing appears. I there something to set on the camera or on the mac that i don t know. Thank to help me
BART.
-
2 Replies
-
This should probably be in the FCP forum, but the trick is that after you connect the camera to the tower with the firewire cable, and put the camera into VTR mode, you have to hold down the button on the camera that switches from camera to vtr mode for two more seconds (or however long it takes until the camera mounts to your desktop as “NO NAME”). Then copy the entire contents of the card onto your hard drive, THEN import into FCP.
If you were to add the step of exporting from FCP and importing to AfterEffects, then maybe this post could stay in this forum. 🙂
Made With Care In Brooklyn, NY
-
thank you very much, that was the thing i didn t know, i tried on the forum of the panasonic p2 first, but nobody seems to know that. Thank again, hope i will be able to help you one day
Reply to this Discussion! Login or Sign Up