• AJA Video Systems

  can’t capture HD from flame HD 1080i 59.94

  Posted by Steve Sjao on July 16, 2010 at 5:27 pm

  I try to capture from Flame HD project 1080 59.94i via HDSDI out .. but it can’t
  my aja kipro firmware 1.1.1 (Lastest Firmware) at screen it show input and rec 1080i 59.94
  but status blink and show warning invalid selection ..

  Steve Sjao replied 16 years, 2 months ago 4 Members · 12 Replies
• 12 Replies

• 

  Jeremy Garchow

  July 16, 2010 at 5:37 pm

  Something’s not matching up.

  Do you have the web control panel open?

  If so, check the ‘status’ page and tell me what it says.
• 

  Steve Sjao

  July 17, 2010 at 4:05 am

  Thanks ..
  >> At config page <> At Media page << Encode type : Prores 422HQ For SD Capture it work fine .
• 

  Jeremy Garchow

  July 17, 2010 at 3:11 pm

  [Steve sjao] “For SD Capture it work fine . “

  So you must have your in convert set. Conversion should be set to none. Record type should be normal (not psf).

  I think your html code got truncated. I can’t read what you wrote there, sorry.
• 

  Steve Sjao

  July 17, 2010 at 3:56 pm

  sorry about that
  my setup

  rec type: normal
  in conv: none
  out conv : hd 1080
  sdi out : file frmt
  comp out : file frmt
  hdmi out : out conv
  video in : sdi
  audio in :rca
  comp in Lvl : betacam
  comp out Lvl:betacam
  ntsc config :ntsc
  upconv : anamorphic
  down conv :anamorphic
  genlock : input
  tc in : ltc
  tc type : ndf
  video sg : off
• 

  Jeremy Garchow

  July 17, 2010 at 3:59 pm

  What about the ‘status’ page. That shows you what signal is coming in.
• 

  Steve Sjao

  July 17, 2010 at 4:03 pm

  in 1080i 59.94 sdi
  rec 1080i 59.94 rca
• 

  Jeremy Garchow

  July 17, 2010 at 4:07 pm

  OK, that’s all looking good.

  Are you sending LTC to the Ki? if not, that might be where the warning is coming from. As a test, try setting it to TOD and see if that works.
• 

  Steve Sjao

  July 17, 2010 at 4:16 pm

  yes i’m not sending LTC will change to TOD(time of day)
  and let’s you know by tomorrow..
  Thanks.
• 

  Jeremy Garchow

  July 17, 2010 at 4:19 pm

  Also, you are sure you want RCA audio in? I’d also change the out conv to none, and HDMI out to file format.
• 

  Gary Adcock

  July 17, 2010 at 5:56 pm

  [Steve sjao]

  “comp in Lvl : betacam
  comp out Lvl:betacam “

  Caution- this my be your issues,

  The COMP OUT settings for NTSC formats should be SMPTE/10— NOT betacam

  gary adcock
  Studio37

  Post and Production Workflow Consultant
  Production and Post Stereographer
  Technology Development
  Quality Assurance Assistance

  Chicago, IL

  https://blogs.creativecow.net/24640

Reply to this Discussion! Login or Sign Up