-
HDMI output and 4.4.4.
Hello,
I’m using a JVC DILA950 (RS25 in US in think), which accept 422, 444 and RGB through HDMI.
But I think HDMI output via BM 3D+ card is limited to 422. So my question is :
1°/ Does BM plan to update the output to 444 (if its even possible)
2°/ Does it exist a converter doing HDSDI to HDMI 444Thnak you
Config : Mac Pro 2010, 8×2,4Ghz, 16Go Ram, FX4800,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, 5x2to Seagate XT Raid0 drive, DaVinci Resolve 7.02
-
4 Replies
-
Ok, if found the solution,
use HI5 converter from AJA.
I’m buying it
Config : Mac Pro 2010, 8×2,4Ghz, 16Go Ram, FX4800,GT120, Decklink 3D+, RED Rocket, system on Crucial SSD 250, 5x2to Seagate XT Raid0 drive, DaVinci Resolve 7.02
-
I thought decklink’s HDlink Pro does it via HDMI 1.3?
-
This response from Albert Chu of BMD:
This update to support HDMI 1.3 and 1.4 is only available on the HDLink
DisplayPort 3D. I am under the impression this is due to updated and newer
hardware on the HDLink DisplayPort 3D.and
As far as I know, the HDLink Pro will only ever do 8 bit. But I’ll still be happy to re-log this request.
The HDLink DisplayPort I assume uses the same mini display port popular on newer mac graphics cards and macbook pro. Please advise if this is correct. My apologies if this is a stupid question.
I suppose the HDLink DisplayPort 3D would be the adapter to go for rather than the AJA.
Cheers,
Denver Riddle -
[Denver Riddle] “The HDLink DisplayPort I assume uses the same mini display port popular on newer mac graphics cards and macbook pro. Please advise if this is correct. My apologies if this is a stupid question.
“Hi,
It uses a standard sized DisplayPort and not the mini version used by Apple.
regards
Kristian Lam
Blackmagic Design
Reply to this Discussion! Login or Sign Up