Creative Communities of the World Forums

The peer to peer support community for media production professionals.

Activity Forums Sony Cameras PMW EX-1 Picture Profile Settings

  • PMW EX-1 Picture Profile Settings

    Posted by Kirk Johnson on June 18, 2009 at 6:23 am

    Hey everyone,

    I’ve done some searching on the internet for information about the EX-1 picture profile settings and wondered if you could chime in. Are there any settings you’ve used that you like? Under what conditions are they best? Is it better to turn picture profile OFF and deal with it all in post?

    n00bfully yours,

    Kirk

    Michael Slowe replied 16 years, 10 months ago 4 Members · 5 Replies
  • 5 Replies
  • Akbar Ukani

    June 18, 2009 at 10:11 pm

    Personally, I don’t like dealing with color correction in post production primarily because it takes way too much of your time….I would only deal with unless I find it necessary…atleast thats what I think. Personally, I feel that you need to have a good foundation before you can alter anything in post production so thats why I don’t rely on post production completely…..Picture profiles vary according to what you are shooting…I normally shoot corporate videos and weddings….here are my picture profile settings:

    Matrix: On, High Saturation, +3
    Gamma: 0, Cine 3 ( normally go back and forth b/w cine 3, cine4, standard 3, standard 4)
    Black: -5
    Black Gamma: -10
    Low Key SAT: 0

    My Gain Settings are -3 (low), 0(medium), 3 Or 6 (high)

    As far as the white balance is concerned, I have 2 profiles set….the first one has a preset white of 3200K and the second one has a preset white of 5600K….If you are going to run AWB, I highly recommend buying those white balance cards and trust me do not shoot in “Auto” mode with this camera…the results will be satisfactory, but not exemplary…..

  • Kirk Johnson

    June 18, 2009 at 11:13 pm

    Thanks a lot!

    I just ran a test with these settings and I like the look of it.

  • Akbar Ukani

    June 19, 2009 at 3:11 pm

    Keep me posted if you find any other settings for picture profiles….like you, I had to dig my way around the net to find it..

  • Chris Clifton

    June 19, 2009 at 7:55 pm

    The Vortex settings are terrific in any situation I’ve been in so far:

    Matrix: ON
    High SAT
    White: Preset White: 5600
    Gamma: CINE4
    Black: -3
    Black Gamma: -2

  • Michael Slowe

    June 20, 2009 at 9:24 am

    Couldn’t agree more concerning the Vortex settings as explained by Doug Jensen in their wonderful double DVD EX workshop. This I honestly believe should be essential viewing for anyone new to these cameras, it saves weeks of experiment and trawling menus etc. He’s a real pro and his chapters on dealing with the media are good too.

    Michael Slowe

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy