-
Sennheiser Ew100 Em100
Hello,
I have a Sennheiser EM100 receiver and a EW100 transmitter. This system works great for our church. Recently I was asked to get a second transmitter, so I bought another EW100 from ebay. I assumed that I could have both transmitters on at the same time, but I have not been successful in getting it to work. Well, sometimes one transmitter will be on and then the other will work. If I turn one of them off then everything works fine. Both transmitters work but not at the same time. Is there a special setting or do I need to get another receiver? Thanks for any help.
Jim
-
5 Replies
-
Your problem is that both transmitters are on the same frequency. You can have one transmitter feeding many receivers (like television or radio does)but not the other way around. You’ll need to get another receiver in the same frequency block. Then you will need to tune each set to different frequencys within the block.
Eric
-
AND to lessen the chance of problems, make sure you get another receiver from the same manufacturer / product range (if youre picking one up off ebay.) There is nothing to say that a different manufacturers frequency will be able to pick your sennheiser even though the freq may be the same!
PeterPeter
-
Hello James and welcome to the Cow Audio Forum.
What were you trying to do with two transmitters and one receiver?
Regards,
Ty Ford
Want better production audio?: Ty Ford’s Audio Bootcamp Field GuideWatch Ty play guitar -
Hello Ty,
We want to have both transmitters working during our church service. I was hoping I only needed on reciever and both transmitters would be able to connect to it at the same time. Oh well, I will just buy another receiver.
Thanks,
Jim -
You are correct, sir! 🙂
Want better production audio?: Ty Ford’s Audio Bootcamp Field GuideWatch Ty play guitar
Reply to this Discussion! Login or Sign Up