• Audio

  how to wire a PPM …

  Posted by Matthias Halibrand on April 26, 2008 at 10:37 am

  Hi guys,

  I would like to install a PeakProgramMeter (PPM 1206 manufactured by RTW) which I happend to still have to my newly installed Kona3-Breakout-Box. This has two cinch-connectors for stereo out.
  The PPM has only 5-pole DIN-connectors, which are differently labelled, so which one to use, and what pole goes where?

  They are labelled as follows:
  1.: 175 mV – 30V/> 47K
  2.: 1,55 V/> 47 K
  3.: 155 mV/> 42 K

  The first one has a PTC-resistor (I’m not sure if this is the right translation) on each side, which can be adjusted.

  So, which one is the right one for the analog line-out of the Kona3-breakout-box?
  What pole-number inside the DIN-plug do I have to solder to what pole of the cinch-plugs?
  If I want to use the same out for monitoring, too, how would I do that, since the PPM doesn’t seem to have an out.

  Thanks a million for your help,

  MatzeHali

  Matthias Halibrand replied 18 years ago 1 Member · 1 Reply
• 1 Reply

• 

  Matthias Halibrand

  April 30, 2008 at 10:26 am

  Is really noone of the Audio-Pros able to answer that question?

  Come on guys!

  🙂

  Thanks anyways,

  MatzeHali

Reply to this Discussion! Login or Sign Up