Hi again, Craig.
And, thanks again for the info. I’m about to do some test shooting using a slower shutter speed to see if that helps. I’ll continue to keep the frame rate as high as I can (as you mentioned, I’ve been shooting at i60, so that’s not likely causing my problem).
You mentioned it’s a good idea to all use manual settings on the Vixia. I will set the camera to ‘shutter priority’, and use 1/30 sec. The camera then sets the aperture. (Though, there is still some control over the “exposure”, but I don’t know if the adjustment is for the gain or the aperture…? The manual isn’t clear on this. In any case, I’ll use 1/30 sec.)
You were wondering about my ‘target frame size’ and the kind of de-interlacing I used. The de-interlacing was done right in Final Cut Express, so whatever that program uses is what was used. I don’t believe it gave me various options. As for target frame size, I’m not quite sure what you mean. I mentioned previously that my settings of output into Flash included a resolution of 640×360. Is this what you mean?
I will play around with some of the compression settings once I’ve done some testing with my camera settings. In the meantime, thank you again for your kind assistance.
Vic