Terence Christopher
Forum Replies Created
-
Thanks for your reply.. I do not have your expertise, but was coming to the realisation that M2T was the stumbling block. I however posted this to see if I was mistaken and that there was a way forward without that step.
Thanks
Terence -
Michael I think this problem which wasted a lot of time for everyone comes in part from the lack of access to short instructions on these simple jobs. The discursive manual is a good introduction but does not allow anyone to find the simple steps to add a still to a time line. The hidden short cuts and triggers/switches are impossible to find. I don’t wat to repeat this in another setting so I wonder whether you can point me towards a good synopsis of commands/ functions and how to implement them
Thanks
Terence -
Dear Michael Thanks for your kind assistance to this dummy who didn’t know how to identify the track properly before entering the Still. It popped in without a problem once I followed your instructions I was about to delete and restart the project.
My humble apologies for advertising my ignorance so prodigiously. Henceforth I shall try follow you to see where you impart your wisdom
Terence -
No I am not. I was trying to paste. I will try it to see and will reply. You are being very kind and helpful. I am really grateful
-
I am on the same. I have tried taking other still and they didn’t work either. I have been looking around the project and find a spurious audio track. I therefore think I will restart it and see whether there has been some corruption that is causing the problem. I really thank all the kind people who have offered help. However I think the project is not worth the time wasted and I should rework it. If I find this problem elsewhere in a clean project I will come back for more Ideas
Thanks so much
Terence -
Michael
Here is a screenshot I tried to take it while attempting to paste into track 2 with the no entry sign showing, However that seems not to have worked.
I think I will try from scratch again just in case there is something that I did earlier which fouled it up -
Michael thanks for that correction. I did not know these issues. I have a lot to learn!!
Terence -
Mainly yes I have been dragging just this one file from the bin I will try to set up the screen shots you recommended. I have been reading through chapterS 2+3 of the manual to double check my settings and found that there the setting for the stills gallery was mixed up. I have a computer with 2 Tb drive but most of my files are on a NAS. The system set itself up not knowing about the NAS and worked. Then not knowing whether the HD would gradually fill up. I got the impression that I should put the ?? temporary stores on the NAS. I now have made them both accessible as they should have been before. Hopefully that will help. I will get back with the screen shots
Thanks for your help
Terence -
I apologise for the error I should have said HDMI
-
I thought that 4K required 64 bit processing partly because of the bigger colour spectrum that it can resolve. I think that information would be in the HTML 2.1 specification. Perhaps this is all irrelevant but I know it is discussed.