Kaye Woods
Forum Replies Created
-
ok good to know…
what about my other question? Why would I not be getting audio when I switch from 720/24pn to 720/30pn?
🙂
-
Thanks! I thought whenever anything is called 30 fps, it’s always “technically” 29.97. So wouldn’t the canon camera already be in the correct frame rate?
-
this might sound like a simple over look, but it has happened to me. You say the levels in FCP aren’t clipping… do you think it could be the speakers you’re playing out of on your computer or edit suite? I have had that happen to me. My speakers were out putting more than they could handle because the bass or something was too high. The actual audio in the video was fine. Try playing the audio on different speakers or adjust the speaker levels. 🙂
-
would you say this is necessary for great audio? Would this eliminate room noise/wind and other ambient noises? I’m always plugging directly into the camera, but is the mic really SUPPOSED to be plugged into something else?
-
thanks everyone! I looked up the mixer from the link provided in a previous post. It is expensive. Is that for post production mixing? I looked on B&H and found this https://www.bhphotovideo.com/bnh/controller/home?O=NavBar&A=getItemDetail&Q=&sku=386808&is=REG&si=rev#specifications to use during recording. Would this fix my uneven audio levels during recording?
-
Thank you! I love creative cow! 🙂
-
ok my camera connects. It’s the rental… must be a bad port?
-
it was the switch on the front THANK! 🙂
-
So how do I capture into FCP in 30p and not 60i? On my capture settings, what do I need to set my capture input to?
What is the best setting to capture onto tape? 60i or 24PA? I don’t want to deal with interlacing anymore!
-
Ok sooo… it wasn’t a capture thing. It was a sequence thing. After fiddling around with the easy setup settings, I’m not exactly sure what I changed since i did the same thing a dozen times, but now it looks crystal clear.