Replies – Forums – Julian Masters – Page 6

Forum Replies Created

Page 6 of 11

← 1 … 5 6 7 … 11 →

Julian Masters
July 28, 2014 at 6:09 am in reply to: Reliable link to EX1 firmware update??

Hi Ann.
I’m on holiday at the moment so can’t get to my stored files to add it to dropbox until the middle of next week.
What audio problems are you getting?

Regards,

Julian.
Julian Masters
June 25, 2014 at 9:38 pm in reply to: Reliable link to EX1 firmware update??

Not as fast as your reply !!
Julian Masters
June 25, 2014 at 9:35 pm in reply to: Reliable link to EX1 firmware update??

Hi Tim.
Dropbox link sent.
Good luck.
Julian Masters
May 30, 2014 at 5:43 pm in reply to: Reliable link to EX1 firmware update??

Hi Raj.
Dropbox link sent.
Regards,
Julian.
Julian Masters
May 30, 2014 at 8:03 am in reply to: Reliable link to EX1 firmware update??

Hi Ann.
I’ve not had any audio issues after doing upgrades.

Does it do the same when recording using either the xlr’s or the internal microphone? If it’s using the xlr’s you haven’t knocked the switches to line level.

Also, does the audio metering on the display show good levels?
Julian Masters
May 29, 2014 at 11:19 am in reply to: Reliable link to EX1 firmware update??

Hi Ann.
I’ve sent you a dropbox link.
I haven’t got the 1.13 versions in there, but if you upgrade up to 1.14 that should cover every update that was in 1.13

If you decide to upgrade further, the process changes slightly on v1.20, but if you follow the instructions you should be OK.

Also, do each upgrade one after the other. I found v1.10 goes through really quickly and afterwards it still says you’re on 1.05 But if I didn’t do the 1.10 then the 1.11 wouldn’t install correctly.

Good luck.

Julian.
Julian Masters
May 28, 2014 at 7:52 am in reply to: Reliable link to EX1 firmware update??

I have got copies of 1.13, but I haven’t put them in my Dropbox folder because I’ve got two versions.
One is 1.13_0538 and the other is 1.13_0542. When I originally saved the second one I remarked as it being for the “old version” board.
However, in all the upgrades I’ve done I go from v1.12 up to v1.14, and then up to the later versions, and haven’t had any issues.
Let me know an email address and I can send you a dropbox link.
Regards,
Julian.
Julian Masters
May 25, 2014 at 9:15 pm in reply to: Reliable link to EX1 firmware update??

Hi Ben.
I’ve sent you a Dropbox invite.
However, because I use Windows, then apart from the last couple of updates all the other ones are just the Windows versions.
So if you’re not able to get hold of Mac versions you may have to get hold of an old XP computer. (I’ve never tried them with windows 7).
Good luck,
Julian.
Julian Masters
May 5, 2014 at 2:04 pm in reply to: Sony PMW Firmware problems

I followed your link and got the same message.

However, I’m in the UK and use the .co.uk site, and that allowed me to download the file.
If you go to
https://www.sony.co.uk/pro/product/broadcast-products-camcorders-xdcam/pmw-200/overview
then “resources”, then v1.32 appears there.

The final download page was https://www.sony.co.uk/pro/support/software/SET_BPE-SS-1013/20

Just check it’s the correct one before downloading/installing.
Regards,

Julian.
BTW I’m using IE9.
Julian Masters
May 5, 2014 at 1:45 pm in reply to: Reliable link to EX1 firmware update??

Dropbox link sent.
Regards,
Julian.

Page 6 of 11

← 1 … 5 6 7 … 11 →