Creative Communities of the World Forums

The peer to peer support community for media production professionals.

Activity Forums Apple Final Cut Pro Legacy MAC PRO RAID CARD

  • Paul Jay

    August 31, 2007 at 8:55 am

    Go to applestore.

    Select Mac Pro

    Scroll down until you see RAID CARD

    Click Learn more.

    It’s doesn’t give you FCP MB/s ofcourse but lots of information about the RAID/Speed options.

  • Walter Biscardi

    August 31, 2007 at 9:52 am

    [Paul] “Will the Mac Pro Raid card(internal) and 2 x sata 750gb drives
    be capable of HD uncompressed 4:4:4 or 4:2:2. Is anyone running a system like this? Would be using Kona3 card as well.”

    No 4:4:4 for sure. doubtful for 4:2:2.

    Generally you need at least 5 drives to do uncompressed 4:2:2 HD and 8 drives to do 4:4:4. We have the MaxxDigital 8 drive, 8TB SAS/SATA array and it can top out at 517MB/s. But again, 8 drives.

    I think you’ll only top out around 100MB/s if you’re lucky with two drives.

    Walter Biscardi, Jr.
    https://www.biscardicreative.com
    HD Editorial & Animation for Broadcast and independent productions.

    All Things Apple Podcast! https://cowcast.creativecow.net/all_things_apple/index.html

    Read my blog! https://blogs.creativecow.net/WalterBiscardi

  • David Roth weiss

    August 31, 2007 at 1:36 pm

    [Paul] “Will the Mac Pro Raid card(internal) and 2 x sata 750gb drives
    be capable of HD uncompressed 4:4:4 or 4:2:2.”

    Paul,

    Its clear that you’re not coming at this subject from the right perspective. When considering a raid array your considerations cannot be from the standpoint of the minimum requirements necessary to edit a particular format. That would get you perhaps a single stream of your chosen format, and with little overhead for audio tracks and graphics, and even that would begin to lag after it began to fill with media.

    A proper raid configured for professional editing requires not just the necessary throughput, but the necessary “sustained throughput” to edit several streams of your chosen maximum video, plus additional overhead for audio and graphics, and the salient numbers to consider are not the max speed when the array is empty, but rather its throughput when it approaches 85% full (that should be considered maxed out).

    So, two striped SATA drives is not even close to what you need for uncompressed HD, and four striped drives might possibly get you playback of one or two streams without dropping frames, but certainly could not provide the necessary sustained throughput for editing.

    Listen to Walter. An eight drive array is what works for uncompressed HD at 4:2:2 and for 4:4:4 even more.

    David

    David Roth Weiss
    Director/Editor
    David Weiss Productions, Inc.
    Los Angeles

    POST-PRODUCTION WITHOUT THE USUAL INSANITY

  • Jim Froom

    August 31, 2007 at 4:50 pm

    Walter, is your raid a sata raid or sas. ie 7200 rpm sata or 10k or 15k sas drives?

  • Walter Biscardi

    September 1, 2007 at 2:05 am

    [willisub] “Walter, is your raid a sata raid or sas. ie 7200 rpm sata or 10k or 15k sas drives?”

    SAS/SATA with 7200RPM 1TB drives.

    Walter Biscardi, Jr.
    https://www.biscardicreative.com
    HD Editorial & Animation for Broadcast and independent productions.

    All Things Apple Podcast! https://cowcast.creativecow.net/all_things_apple/index.html

    Read my blog! https://blogs.creativecow.net/WalterBiscardi

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy