-
Cannot hear channel 3 & 4 in finalcut pro
I have music on channel 3 & 4 in finalcut pro. I see the music on the audio meter but i cannot hear it. What do I need to do to hear channel 3 & 4?
-
4 Replies
-
-
Check how many tracks in the sequence – it sounds like it’s set to output 4 tracks, and tracks 3/4 are set to mixdown to 3/4 on the audio mixer. So, either:
1) set the audio output to one stereo pair or
2) Map A3/A4 to output from tracks 1/2To find out how to do either of these, I recommend a good read of the manual – it’s pretty good for most of this.
Ben
Editec Broadcast Editing Ltd
EVS & FCP specialists for live OB operations. FCP systems just used on Sky Sports coverage of the Ryder Cup – live from the K Club.
“The Supercar Run” now available for international distribution from http://www.electricsky.com
-
Control-Click on the audio panel on the left side of the timeline. Hover your mouse over where it says “Audio Outputs” and make sure Ch. 1 & 2 are selected, not 3 & 4. It sounds like you have it set 4 audio outputs in your Sequence Settings when you only really want 2.
-
I forgot to add, do the Control-Click thing on the audio panel down at the locations of both Ch. 3 & Ch. 4. You’ll have to change the setting for both tracks.
Reply to this Discussion! Login or Sign Up