Creative Communities of the World Forums

The peer to peer support community for media production professionals.

Activity Forums Panasonic Cameras Panasonic AJ-HD1200A assemble edit ?

  • Verne Mattson

    May 1, 2005 at 1:26 pm

    Yes, it can assemble edit. I recently did both 60p and 24p assemble edit to the same tape via firewire.

    Maybe check your deck settings. Check input setting and check Sys Format. I couldn’t do the aforementioned assemble initially because a client had set the deck input to HD-SDI and the sys format to 1080i and I was trying to do a 720p assemble via 1394.

    Hope this helps.

  • Ray Palmer

    May 1, 2005 at 3:20 pm

    Yes, Bob, the 1200A will do assemble edits.
    If it doesn’t, take out a gun and shoot it.

    (Inside joke for old AVID L’rs)

    Ray Palmer, Engineer
    Salt River Project
    Phoenix, AZ
    602-236-8224 office
    There are three types of people in this world, those that can count and those that can’t.

  • Jeremy Garchow

    May 1, 2005 at 8:30 pm

    Is that with 1394 in, or HD-SDI in?

  • Steve Mahrer

    May 2, 2005 at 1:25 am

    Bob et al:

    The 1200A deck CANNOT perform ANY edit function, sorry to be rude (block caps) but this is a recurring issue. Editing on tape requires very specific hardware issues such as flying erase heads, servo offsets etc. Just because you can “crash” record into a tape doesn’t mean it is an edit. If you recorded the tape into which you “crash recorded” (same VTR used for both fuctions), you will have some semblence of format integrity. However if you try to “edit” into any other tape, chances are that you may get high errors, concealments, and servo unlocks at each edit point. Your client won’t like that….! Bad ju-ju….

    Please, for the 483rd time, the 1200A doesn’t, can’t and never will edit!

    Rant over…. Argh!

    Steve Mahrer

    Panasonic

  • Walter Biscardi

    May 10, 2005 at 8:35 pm

    [Steve Mahrer] “The 1200A deck CANNOT perform ANY edit function, sorry to be rude (block caps) but this is a recurring issue”

    Steve, the deck performs Edit to Tape (Assemble Edits) here all the time via Firewire control from Final Cut Pro. It’s not perfectly frame accurate, but it’s generally good within 2 frames.

    Walter Biscardi, Jr.
    Creative Genius, Biscardi Creative Media
    https://www.biscardicreative.com

    Now in Production, “The Rough Cut,” https://www.theroughcutmovie.com

    “I reject your reality and substitute my own!” – Adam Savage, Mythbusters

  • Jeffc

    May 16, 2005 at 6:23 pm

    Dear Bob,
    I thought I read one of your post a few weeks back that you were going to deliver your thoughts on an eSATA external 8 port RAID system? Was that you or am I mistaken?
    love,
    jeff

  • Jeremy Garchow

    May 16, 2005 at 8:25 pm

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy