• Canon Cameras

  C100/Ninja 2 …

  Posted by Adam Goodley on February 29, 2020 at 9:37 am

  Hi all,

  My trusty C100 will no longer connect to my Ninja 2. I tried with a mate’s C100 with the same result.

  I changed the HDMI cables 3 times. Same result and the Ninja 2 continued to claim that there was ‘No Signal’.

  However, I plugged the C100 into an external monitor and then a smart TV – all was well! A good, clean picture, the HDMI connections were all snug and jiggling them did not reveal any loose connections or result in any picture breakup.

  I then plugged my 5DMK4 into the Ninja 2 and the video image appeared immediately. Again, a good, clear picture and no issues when the HDMI connectors were jiggled about. We tried a second DSLR and that worked well too.

  So, the Ninja 2 has refused to work with 2 different C100 cameras but works quite happily with a Canon 5DMK4.

  I have waved my hand in front of the lens and swung it from side to side to activate the pulldown – nothing.

  Any ideas would be very welcome.

  Cheers!

  Adam Goodley replied 6 years, 2 months ago 1 Member · 0 Replies
• 0 Replies

Reply to this Discussion! Login or Sign Up